On Board Charger with One Touch Programming.

Easier than setting a clock. No need to open case, download software of wade through manuals. Change profiles to charge every battery type in seconds. Also controls gassing cycle and recycle times.

Charge gel, AGM, starting, and wet deep cycle batteries

Scissor Lifts, Golf Cars, Personnel Carriers, Electric Cars, Floor Scrubbers, Railroads, Engine Generators, Pallet Trucks, Mining and all Material Handling Applications.

Comes with 24 inch 3 prong AC cord, and 6 feet of color coded DC leads with 3/8 inch ring terminals.


Drive Lockout Explained:

   This feature when wired into your carts ignition switch circuit will not allow the vehicle to move until the charger is unplugged.

Temperature Compensation Feature Explained:

   The ambient air temperature compensation feature automatically controls the charge voltage as the batteries get hotter in order to prevent thermal runaway and destruction of your expensive battery pack.

Selectable Charge Features:

F1 – Float: Regulates the battery voltage at 2.3 volts per cell. Best for starting batteries and gels

F2 – Gas & Timed Shut Off: timer trips at 2.3vpc, gassing threshold. Batteries are allowed to gas to a maximum of 2.55vpc before shut off. Best for deep cycle batteries

F3 – Gas & Float: timer trips at 2.3vpc gassing threshold. Batteries are allowed to gas to a maximum of 2.55vpc before dropping into indefinite float of 2.25vdc. Best for deep cycle batteries that may see long periods of inactivity.

F4 – AGM: Batteries bulk charge to 2.3vdc and enter absorption cycle where voltage is allowed to climb to a maximum 2.45vdc before dropping into indefinite float of 2.26vdc.

Digitally displays % of charge and battery voltage.

Tri color LED monitors battery progress

Real ambient temperature compensated float voltage

Current limited and reverse polarity protected to protect against DC overloads.

Vibration Resistant, no moving parts and an integrated design.

Small and Compact, fits slim type scissor lifts and other tight fitting applications.

Rugged Construction, Tough die cast enclosure totally enclosed to resist effects of water, dirt and harsh environment.

Safe, no power in the charge leads until connected to the batteries means no arcing at the charge leads even when shorted together.

100% copper transformer heavy duty rectifiers and a three year warranty.

DC Output, 13 amps at 84 volts

AC Power Input, 117 volt 60hz 12 amp.

Dimensions 6" x 9" x 8"

Weight 42 pounds

Battery Capacity @ 20 hour rate: 80-150 Amp Hour

Optional European Use, 50hz option $10.00 extra

Made in USA

Operating Instructions