Soneil Battery Charger model 41-3605S, 36 volt 2 amp output constant current, equivalent to 4 amp heavy transformer type charger in charging time, 115/230 VAC input replacement Battery Charger for E-36 "Great White" Scooter by Rad2Go, can be used for personal mobility scooters and wheelchairs plus many other applications
XLR 3 pin Connector Plug Item CP5109 sold separately.
Features:
Small size & light weight: Portability is a major feature. The charger
can be installed on-board.
Universal input: (some chargers) Any voltage from 90VAC to 264VAC (without
any switch). This means you only need one charger for the whole world.
UL, ULc (Canada), T-mark (Japan), TUV and CE (electrical EN 60335-1,
Charger EN 60335-2-29, EMC - listed above) safety approvals.
Short circuit protection: If you touch the output +ve & -ve wires
(with AC ON) and there will be no failure (no fuse will blow).
Reverse polarity protection: If you connect the battery in reverse, there
will be no failure (no fuse will blow).The charger will just not work. When the
problem is corrected, the charger will operate normally.
No current drain: If the AC is OFF and the charger is connected to the
battery, there will be no drain of current from the battery.
De-sulfation of battery: The charger will remove loose sulfation and
increase the battery life. (Hard sulfation cannot be reversed.)
Low voltage start: Soneil charger will start charging from 0.5 volts. This
means very deeply discharged battery can be charged. Other chargers cannot do
this.
Maintain full charge & no overcharging: Soneil charger can be left
connected to the battery indefinitely without harming (overcharging) the
battery.
One charger for any type of lead acid battery (no switch): Soneil charger
will charge any type or brand of lead acid battery fully - Gel, sealed or dry
battery. The charger will adjust itself as the battery gets old.
Soneil's worldwide liability coverage (1 million).
Specifications & Battery Curve
Mfg # 3605S
