The AXE by Alltrax, 24 to 48 volt input, 500 amp with plug braking used on industrial carts and fork lifts. Fully programmable controller; just download free software from the internet, then attach your PC or laptop with a straight through 9 pin RS232 serial cable to change settings or monitor voltages, amps, temperature, etc. Plug and play programming makes this controller an excellent choice for a wide variety of applications.
Matches Curtis 1205 footprint & size, 8.5" long.
Key Benefits
Programmable interface
Fault tolerant control inputs
Epoxy potted/Waterproof
Calibration software included with purchase
Programming Functions
Throttle ramp programming
Throttle response rate
Plug brake on/off, plug brake current
High pedal disable on/off
Battery over/under voltage cutback
Maximum output current
Specifications:
Operating Frequency: 18Khz
Throttle Input: 0-5K ohms, 5-0K ohms, 0-5 volts, and ITS (inductive throttle sensor)
Key Input Voltage: 8 volts to 1.5 times max battery volts Quiescent Voltage: less than 75mA
Thermal Cutback: begins at 75C, 95C shutdown
Programming Interface: RS232 serial to host PC running freeware Windows interface
Current Limit: 500 amps
30 second rating: 500 amps
2 minute rating: 500 amps
5 minute rating: 350 amps
1 hour rating: 250 amps
Voltage drop @ 100 amps = <.09 volts
For Technical Documents:
www.alltraxinc.com/Doc_Depot.htmlmfg. part # AXE4855P
Copyright © 2012 EV Parts, Inc.