All New Controller, The Chopper AXE series by Alltrax, 24 to 48 volt input, 650 amp, fully programmable controller. Just download free software from the internet, then attach your PC or laptop with a straight through 9 pin RS232 serial cable to change settings or monitor voltages, amps, temperature, etc. Plug and play programming makes this controller an excellent choice for a wide variety of applications.
Matches Curtis 1205 footprint & size, 8.5" long
Owner's Manual and Wiring Diagram
Key Benefits
Programmable interface
Fault tolerant control inputs
Epoxy potted/Waterproof
Calibration software included with purchase
Programming Functions
Throttle ramp programming
Throttle response rate
Plug brake on/off, plug brake current
High pedal disable on/off
Battery over/under voltage cutback
Maximum output current
Specifications:Operating Frequency: 18Khz
Throttle Input: 0-5K ohms, 5-0K ohms, 0-5 volts, and ITS (inductive throttle sensor)
Key Input Voltage: 8 volts to 1.5 times max battery volts
Quiescent Voltage: less than 75mA
Thermal Cutback: begins at 75C, 95C shutdown
Programming Interface: RS232 serial to host PC running freeware Windows interface
Current Limit: 650 amps
30 second rating: 650 amps
2 minute rating: 650 amps
5 minute rating: 400 amps
1 hour rating: 250 amps
Voltage drop @ 100 amps = <.08 volts
For Technical Documents:
www.alltraxinc.com/Doc_Depot.htmlmfg. part # AXE4865
Copyright © 2012 EV Parts, Inc.