36 volt 30 amp, 1000 watt controller for Currie I-Zip 1000 and Fusion 1000 scooters as well as many other custom applications.
Wiring:
Large bullet connector black & red goes to battery, black to most negative, red to most positive.
Large female spade connector, blue & green goes to motor.
Small black & red male spade connector goes to brake inhibit
Small single red male spade goes to charger inhibit
Small five pin connector: green, red, & black are for an inductive throttle, the black is negative. The outside two wires, gray & orange go to lights
Dimensions: 4" long by 2-3/8" wide by 1-1/4" high
Copyright © 2012 EV Parts, Inc.